Do not rush out of the carton, re-use it as a gift box just as convenient and save the following simple method.
Material:
To make gift boxes, people should prepare the following materials:
- Carton cover, cardboard a bit
- Plates of colored paper
- ribbons
- Supplies: pen, ruler, scissors, glue, gun glue
Making:
Step 1:
Draw 5 rectangles on the carton board according to the specific measurements as follows: a large rectangle 15cm x 34cm in the middle, two rectangles on both sides of the length of 10cm x 34cm, two rectangles on the sides width 10cm x 15cm. The shape of the figure is the main body.
Equivalent, you create 5 rectangles together to wrap the package 15.5cm x 34.5cm, the lid height 3cm. make the package cover.
Step 2:
Cut two rectangular cartons 14.5cm x 33.5cm and 15cm x 34cm to stick in the bottom of the package and cover the bag. Fix the cardboard into 2 rectangles 9.5cm x 33.5cm and 2 rectangles 9.5cm x 14.5cm to stick in the bottom of the package. put the majority of the body panels, box cover, paper in the box on the left side of the paper color pattern, and then fixed on the paper.
Step 3:
Cut, fold and glue the paper edges one by five centimeters into the inner surface from the carton to the package with a glue pump. Similarly, you stick the edges of the paper with the carton cover of the box. Note: Instead of the edge of a paper, 5cm box body, you roll the paper width of 3.5cm to stick in the lid of the box.
Step 4:
Four sealed guns are sealed into four boxes. Next, stick two corners of the three walls into the box cover, each with two corners left to stick the ribbon decorations.
Step 5:
Wrap the ribbon into two pieces larger than the 3 cm box circumference. Insert the ribbon wire into the edge of the paper from the cover of the box. Next, tie the ribbon around the edge into the package, and then attach one end of the ribbon to the other side of the edge of the paper. Then, fold the two corners into the remaining package.
Likewise, you are wrapped in patterned paper outside the box wall paper, box bottom and bag lid. Cut the small ribbon into two similar segments, folded in two, attaching the two ends of the wire from each of the two strips to the length from the bottom of the box to hold the chain. Then, you paste the pads into the box, the bottom of the box and the lid of the box inside the lid of the box, into the box. Finally, cut the ribbon halftone to form a small bow decorated side by side into the lid of the box is finished.
Result:
So the lovely gift bag is complete. You just have to make a gift inside the bag and close the lid again, extremely simple should not you? The secret to hiring this gift package is not difficult, just a little care to cut, fold and paste paper.
Follow us our website
